Showing all 5 results
-
not ratedSchluter Ditra Heat Cable
Heat Cable
Non-Stock available to order
Note: When selecting the heating cable, please note that the table with the heated space in m² does not specify the room size. To determine the heated space, deduct unheated zones such as perimeter areas and storage space from the room size
Application
DITRA-HEAT-E-HK is an electrical heating cable with a unilateral connection for installation in the uncoupling mat DITRA-HEAT.
-
not rated
Schluter Ditra Heat Matting
Polypropylene membrane uncoupling Matting
Non-Stock available to order in the following sizes
- 0.8×1 metre panels (DH5 MA)
- 1×12.5 metre Roll (DH512 M)
Application
DITRA-HEAT is a polypropylene membrane with a cut-back stud structure and an anchoring fleece laminated on the underside.
It is a universal substrate for tile coverings, which serves as an uncoupling layer and vapour pressure equalisation layer and is designed for the attachment of heating cables.
-
not rated
Schluter Ditra Heat Thermostat
Thermostat with Sensor
Non-Stock available to order
- Digital touchscreen thermostat (230 V) with two remote sensors (DH E RT2 / BW)
- Digital floor thermostat set (230 V) with remote sensor (DH E RS 230D / BW)
Application
DITRA-HEAT-E-R is a digital touchscreen thermostat providing full control of time and temperature for floor and wall heating. Temperature is read by the included floor sensor and an additional facility of the integrated air temperature sensor. The discrete design blends in with conventional switch boxes as it‘s only 5.5 x 5.5 cm in dimension. An additional fl oor sensor is included in the box.
DITRA-HEAT-E-RS is a digital floor thermostat for the DITRA-HEAT-E floor heating system. The control unit is removable for easy programming of the time-controlled floor thermostat. The thermostat is supplied as a set with remote sensor (4 m), conduit (2.5 m), sensor sleeve, and junction box.
-
not rated
Schluter Ditra Matting
Waterproofing and Uncoupling Matting
Stockline – 1mtr – 30mtrs
Application
For tiled finishes, consisting of a crack-bridging polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration and an anchoring fleece laminated to the underside.
-
not rated
Schluter Ditra Sound
Mat and Tape
Non-Stock available to order
- Heavy PE Mat 55x75cm, 3.5mm thick (DITRA-S 355)
- Joint covering strip 38mmx50mtr (DS KB 38)
- Edge insultation strip 10 metre roll 6x30mm (DS RSK 630)
Application
DITRA-SOUND is a bonded impact sound insulation for tile coverings, made of a heavy polyethylene mat, which has an anchoring fleece laminated on both sides to bond with the tile adhesive.
